Category Archives: Craft How To

Playhouse Chicken Coop

When we moved to our new house we had to start from scratch building a chicken coop.  I ordered a cheapy prefab coop online to house the 3 hens we brought from the old house.  The coop and run was small, but it did the trick until I had the time (and money) to create something bigger and better.  If I had all the money in the world, I would hire someone to build a super fabulous dream coop – but that’s not my reality.  As you may have guessed, I’m more of a DIY/Repurpose kind of gal.  The end result? A chicken coop made from a kids playhouse.  What do you think?

131112_0014    131112_0017

FYI – The coop was put on top of two pallets that were covered with stapled down linoleum.

Step by Step How To:

1. Clean & Paint

Find an old playhouse (you can usually trash pick one or find a freedie on craigslist). Take it apart and clean the heck out of it.  Then let it dry completely.  (The house I got had mice nests inside….ew.)


Once you have decided on the colors, lay plastic pieces on a blanket and start spray painting.  Krylon and Rustoleon both sell spray paint for plastics.  Read the spray bottle and make sure it’s made for outside and plastics.  You really only need to spray the outside of the playhouse, the inside doesn’t matter.  Make sure you read the label and allow for the correct amount of drying time in between.

IMG_5335 IMG_5333 IMG_5332

2. Weather & Predator Proofing

Once the paint is dry, it’s time to start making sure all the parts are weather tight and predator proof.  Starting with the door, I used heavy duty plastic (sold at walmart in the fabirc section) and chicken wire to cover the holes in the door.  The plastic allows the light to still come in, but protects the hens from the rain, wind, etc.  The chicken wire keeps out any predators that might try to scratch their way through the plastic.  I caulked the edges for extra sealing, but I don’t think it’s necessary.  I used screws designed to hold the chicken wire in place (like this).

IMG_5342 IMG_5367

Attach plastic and chicken wire over the windows.  Again, you want light to come in.


Since there were 4 windows in the coop, I covered 2 of them with plastic and chicken wire and the other two I covered with repurposed lids of old plastic bins.  My kids helped to decorate those windows with permanant markers which was then coated with a clear coat of spray paint.  The white color still lets some light in.

IMG_5365 IMG_5364

Now for the tricky back window.  In my coop, there was a gaping whole in the back of the playhouse.  I formatted a hinged door to cover the hole.  This allows access from the back to clean it out.  At first I thought it would be a good “egg collection” door, but you will see I didn’t end up putting the nesting boxes there. I put another piece of heavy plastic to help prevent drafts under the “flap door”.

131113_0002 131113_0001

Now you can put the pieces together to finish the inside and finishing touches.

3. Fixing Up The Entryway

First, add some kind of predator proof latch to the door.  I also added a hook and eye latch to prop the door open and also keep the door from flapping in the breeze.  I also found that when it rained, the rain blew in the front door, so I added an overhang using an old plastic bin lid.

IMG_5359  IMG_5356

131112_0009  131112_0008

4. Preparing The Inside

You’ll need to add some kind of roosting bar and nesting boxes.  The playhouse I used had a little shelf on the inside.  I thought it would be a great place for the nesting boxes.  I added supports on the sides of the shelf and put a little ladder together. Then I added some more plastic bins (can you tell I have a bunch laying around?) Here is what it looked like the first time.

  IMG_5363  IMG_5361

I quickly found out that the girls would roost on the nesting boxes at night and (ahem) poop inside the nesting boxes.  Yuck.

So I reconfigured the nesting boxes and put them on the floor under the shelf and attached some peices of wood to the shelf for roosting.  Since the hens didn’t seem to use the ladder, I took out the ladder to make more room.  This is what it looks like now and it has worked much better.


Now all you have to do is add wood chips, water and food and you’re good to go!  Total cost was about $100 – which was mostly paint.  The fencing was another $100.  Considering most new coops cost over $500 NOT including a fence, I think my $200 project is pretty awesome!

131112_0013 131112_0017

Things I will probably still do to make it even better:

– Secure the playhouse to the pallets with “L” brackets.

– Secure the pieces on the inside with “L” brackets and then seal the seams with caulk.

– Add a vent out the top that can be opened and closed. (Right now the natural breeze through the seams provides air flow, but I worry the draft will be too cold this winter.)

I’d love to hear your thoughts and comments on how I could make the coop even better! Thanks for reading! 🙂

Cookie Sheet Message Board

Ah, the need for places to hang reminder notes and school papers.  I had some cork boards already and wanted something a little different, but it had to be thrifty too.  I saw this great idea on Pinterest and thought I would give it a try.  Turned out pretty good I think.  As always, the “How To” is below:



  • Cookie Sheet
  • Sand Paper
  • Spray Paint
  • Ribbon
  • Hot Glue

Step By Step

  1. Clean cookie sheet and sand smooth.
  2. Apply several coats on spray paint to both sides of cookie sheet – allow time for each side to dry completely.
  3. Hot glue ribbon to the back of cookie sheet.
  4. Hang and enjoy!

IMG_5031     IMG_5032

IMG_5033     IMG_5086


Cardboard & Yarn Frame

Another thrifty craft adventure.  I needed (ok I wanted) a frame to go around my family calendar.  It just looked too lonely and naked against the plain wall.  I began my search in my bin of spare frames – no luck.  I went to the local craft store – the prices were too high.  I got inventive – score!



  • Cardboard
  • Yarn
  • Ruler
  • Pencil
  • Sharp Blade
  • Glue (I used a Hot Glue Gun)

Step By Step

  1. Trace the outline of your picture or calendar about 1/2 an inch wider to allow room for the yarn.
  2. Trace the width of the ruler to create a boarder.
  3. Using the egde of the ruler and a sharp blade, cut out the frame.
  4. Put a dab of hot glue on the cardboard and secure the beginning of your yarn.
  5. Start wrapping the yarn around the cardboard in whatever style you like!  I also put a little dab of hot glue along the way to keep the yarn tight. **This took longer than I thought it would, just an FYI.**
  6. Secure the end of the yarn with hot glue.
  7. Hang on the wall.  I used Command Strips.

IMG_5025     IMG_5029  IMG_5027 IMG_5079   IMG_5085  IMG_5087

Canvas Verse/Quote Painting

I love the look of wall decals, but I DO NOT like the price.  When I created my “Family Command Center”, I wanted to add a Bible verse to hang above the calendar.  After searching on-line, I decided I could make something for less money.  If you are a craft lover like me, you probably have most of these materials in storage.  If you are NOT too crafty, you can still make this craft. Seriously – this could be a great kid project too!



  • Canvas
  • Letter Stickers
  • Spray Paint
  • Craft Paint & Paintbrush

Step By Step

  1. Choose your verse or quote.  Apply the sticker letters on the canvas however you would like the verse/quote to appear.
  2. Spray paint the canvas OVER the stickers.** I recommend 2 layers minimum of spraypaint.**  Let dry.
  3. Hand paint or stencil a design OVER the stickers. Let dry.
  4. Peel off stickers. **Tweezers are helpful for small stickers**
  5. That’s it!  Told you it was easy 🙂

IMG_4999  IMG_5002

IMG_5004  IMG_5006  IMG_5008

IMG_5013   IMG_5014


What verse or quote will you paint?